Raritan Computer Wireless Office Headset SW2 User Guide

III.-Installation  
Important: Before beginning installation, power OFF all devices and ensure that all devices are properly grounded. Failure to do so may result in dam-  
age to computers and/or to the SwitchMan unit. Note: Avoid placing cables near machines such as fluorescent lighting, air conditioning equipment,  
etc, that create electrical noise. For USB computers: USB signals are the strongest when transmitted up to 15 feet (4.5m) between the KVM and the  
CPU. Beyond 15 feet (4.5m), probability of signal degradation can occur, causing the device to fail.  
Connecting the Console  
your computer.  
switch and automatically install the HID USB  
driver if it is not already installed on your com-  
puter.  
These step numbers correspond with the dia-  
gram numbers, below.  
6. Connect the VGA plug of the included KVM  
cable (PS2 Keyboard and PS2 Mouse connec-  
tions are built into this VGA plug) to the monitor  
port in PC1 panel on the rear of the SwitchMan  
unit. Plug the connectors on the other end of  
this cable into the Video, PS2 Keyboard, and  
PS2 Mouse ports on your computer.  
Please power OFF all computers before you  
start.  
Connecting USB Peripheral Devices  
1. Connect your USB keyboard and mouse  
directly to the USB keyboard and mouse con-  
sole ports on the front panel of the SwitchMan  
unit.  
12. Connect USB devices other than keyboard  
and mouse to the HUB ports on the front panel  
of the SwitchMan unit, such as USB printers,  
scanners, cameras, etc.  
SW2-USB-COMBO  
7. Connect the speaker plug of the same  
cable to the speaker port in the PC1 area panel  
on the rear panel of the SwitchMan unit. Plug  
the speaker plug at the other end of the cable  
into the speaker port on your computer.  
2. Connect the male VGA connector (HDDB-15  
pin) from your monitor to the console VGA port  
on the rear panel of the SwitchMan unit.  
Notes:  
> The keyboard and mouse must be con-  
nected to the "CONSOLE" USB ports.  
Otherwise, the SwitchMan unit utters the  
beep sound.  
3. If using speakers, connect the male 3.5mm  
plug to the SPEAKER (green) port on the rear  
panel of the SwitchMan unit.  
8. Connect the MIC plug of the same cable  
to the microphone port in the PC1 area on the  
rear panel of the SwitchMan unit. Plug the MIC  
plug at the other end of the cable into the MIC  
port on your computer.  
4. If using a microphone, connect the male  
3.5mm plug to the MIC (pink) port on the rear  
panel of the SwitchMan unit.  
> SwitchMan's default link is to the first  
computer powered ON in the installation.  
> You may have to enable USB support on  
your system BIOS for full support. Please  
refer to your computer's user guide for fur-  
ther details on how to enable USB support.  
9. Repeat steps 5-8, connecting the remaining  
ports on the rear panel of the SwitchMan unit to  
the ports of your computers.  
Connecting the Computers  
5. For USB computers, connect the B-type  
USB connector plug to the PC1 USB port on  
the rear panel of the SwitchMan unit. Connect  
the other end of the cable (the USB A-type con-  
nector plug) to an available port on your USB  
computer or to a USB hub that is attached to  
10. Plug the included power adapter into an AC  
power source, and then plug the power adapter  
cable into DC port on the rear panel of the  
SwitchMan unit.  
SW4-USB-COMBO  
> Only two models of Multimedia keyboard  
are supported. They are:  
SwitchMan-USB-COMBO-(SW2-USB-COMBO,-SW4-USB-COMBO)  
• Microsoft -- Natural Keyboard Pro  
• Apple/Mac -- A1048  
Your SwitchMan USB-COMBO shipment includes: (1) SwitchMan USB-COMBO unit (either the SW2-USB-COMBO 2-port  
switch unit or the SW4-USB-COMBO 4-port switch unit), (1) SwitchMan Stand, (1) Power Adapter, (2) CSWUSBPS218  
USB cables, (1) USB Cable, (1) printed Quick Installation and Setup Guide (1) CDROM containing Quick Installation and  
Setup Guide, and Registration and Warranty papers. Please contact your local Raritan office right away if you do not  
receive all of these items.  
11. Power ON your computers. Your operating  
system should recognize the SwitchMan KVM  
SW2-USB-COMBO Installation  
SW4-USB-COMBO Installation  
I.-SwitchMan-Features-and-Benefits  
Features:  
Benefits:  
- Control up to four USB or PS2 computers and multiple  
-
Compliant with USB 2.0 specifications - delivers up to  
12  
12  
480Mbps and supports USB hot Plug and Play  
USB (1.1 / 2.0) peripheral devices - all from one USB  
console  
-
-
-
-
-
-
LED display for easy status monitoring  
-
Switch from port to port easily using Hot keys or easy-  
to-use push buttons  
Asynchronously switch between USB / PS2 computers  
Supports high resolution video up to 1920X1440@75Hz  
Supports VGA, SVGA and Multisync monitors  
Easy installation - no software  
1
1
-
1
1
and multiple USB peripheral devices using Hot Keys and  
Push Buttons  
Works with Windows 2000, XP, Vista and MAC  
Supports audio (speaker/microphone) for multi-media  
-
-
AutoScan for fast monitoring of computers  
Firmware Flash Upgrades  
applications  
II.-Overview-and-Specifications  
Hot Keys: Hot Key combinations  
allow you to use designated key  
commands to switch computers,  
connected USB devices, and micro-  
phone/speaker. Control multiple  
computers using a simple Hot Key  
sequence on your keyboard.  
LED Display: Front panel PC and  
HUB LEDs allow for easy status  
monitoring.  
SW4-USB-COMBO unit  
9.25" (W) x 5.54" (D) x 1.73" (H)  
235mm (W) x 142mm (D) x 45mm (H)  
Weight:  
2
2
Flash Upgrades: The upgrade abil-  
ity allows you to obtain the latest  
firmware upgrades for your KVM  
Switch. These upgrades allow con-  
stant compatibility with the latest  
devices and computers. Please con-  
tact your dealer or Raritan Technical  
Support for the upgrade procedure  
and cable.  
6
5
4
7
8
8
5
6
7
SW2-USB-COMBO:  
1.58 lbs (0.72 kg)  
SW4-USB-COMBO:  
2.33 lbs (1.05 kg)  
AutoScan: The AutoScan function  
allows you to automatically scan and  
monitor all computers that are con-  
nected to your KVM Switch.  
Operating Temp:  
32° to 104° F (0° to 40° C)  
Storage Temp:  
10  
3
10  
3
4
-4° to 140° F (-20° to 60° C)  
Humidity:  
F r o n t - P a n e l P C a n d H u b  
Selectors: Push buttons convenient-  
ly located on the front face of the  
KVM Switch, which allow for simple,  
manual PC, USB Hub, and Audio  
port selection.  
Specifications  
Dimensions:  
20-85% RH, non-condensing  
SW2-USB-COMBO unit  
7.24" (W) x 4.84" (D) x 1.73" (H)  
184mm (W) x 123mm (D) x 45mm (H)  
 
Rev. E December 2007  
255-00-2100-00  

Q See Cable Box QTSD2404 User Guide
Radio Shack Portable Speaker 32 2038 User Guide
RocketFish Home Security System RF RBUSB User Guide
Roland Electronic Keyboard HP 203 User Guide
Russell Hobbs Dishwasher RHSLDW1 User Guide
Samsung Car Stereo System 400UX 2 User Guide
Samsung Digital Camera EC DV150FBPBUS User Guide
Samsung Security Camera SCC C6435P User Guide
Samsung Security Camera SNC B2331P User Guide
Seiko eBook Reader WP5402R User Guide